![Veterinary Monitor Portable Patient Monitor for Animal]( "Veterinary Monitor Portable Patient Monitor for Animal")
![Veterinary Monitor Portable Patient Monitor for Animal]( "Veterinary Monitor Portable Patient Monitor for Animal")
Veterinary Monitor Portable Patient Monitor for Animal
![Veterinary Monitor Portable Patient Monitor for Animal]( "Veterinary Monitor Portable Patient Monitor for Animal")
Features:
Body
8.0 inch high-brightness TFT LED
Support display maximum 8 waveforms
Support 6 channel ECG waveform display simultaneously
Stroage
Support storage of 168 hours trend table and graph review
100 minutes waveform review
500 groups NIBP review
100 hours of parameter alarm events review and associated parameters
Alarm
Three-level acousto-optic alarm
Sensor-off alarm
Paper out alarm
Support alarm review
Support alarm pause
Operating System
Multi-display mode to meet different clinical requirement, including standard interface, big font, OxyCRG, trend graph, NIBP review and full leads ECG interface.
NIBP self-test mode: including overpressure test, static pressure test and air leakage test.
15 types of Arrhythmia analysis and real-time S-T segment analysis and pacemaker detection
Drug calculation and titration table
Support multi-language display
Support online software upgrading by net
Interface:
Transducer socket
ECG
SPO2
NIBP
TEMP 1
TEMP 2 / Mainstream EtCO2
Sidestream EtCO2
Input device interface
Knob (Standard)
Performance Specifications
| Dimension | 175mm*210mm*80mm |
| Weight | 1.35kg(excluding accessories) |
| Power Supply | Dimension: 175mm*210mm*80mm |
| Weight:1.35kg(excluding accessories) |
| Display | 8' color TFT LED |
| Resolution: 800*600 pixels |
| Battery (Pluggable) | Type: Rechargeable lithium battery 14.8V/2200mAh |
| Charge Cycle: ≥500 times |
| Working time: 5.5 hours |
| Alarm | Level: Low, medium and high |
| Indication: Auditory and visual |
| Alarm volume adjustable |
| Alarm pause time: 1min, 2min |
| Parameter alarm type: Latch/ Unlatch |
| Input Device | Knob (Standard) |
| Keypad input (Standard) |
| System Output & Extensible Interface | Ethernet Network: 1 standard RJ45 socket |
| Operating Environment | Temperature: 5 ~ 40 ℃ |
| Humidity: 15% ~ 80% (non-condensing) |
| Atmosphere pressure: 86 KPa ~ 110 KPa |
| Transportation and Storage Environment | Temperature: -20~50 ℃ |
| Humidity: 10%~90% (non-condensing) |
| Atmosphere pressure: 86 KPa ~ 110 KPa |
| Safety | IEC60601-1 Approved, CE marking according to MDD93/42/EEC |
| With reference to RoHS Directive 2011/65/EU recasting |
| Trend & Reviewing | Trend: 168 hours |
| NIBP measurement reviewing: 500 groups |
| Waveform review: 100 minutes |
| Alarm event: 100hours of parameter alarms events and associated parameter |
| ECG | Lead mode: 3/5 Leads, I, II, III or I, II, III, AVR, AVL, AVF, V |
| Gain: 2.5mm/mV(×0.25), 5.0mm/mV(×0.5), 10mm/mV (×1), 20mm/mV (×2), |
| Sweep speed: 6.25 mm/s12.5 mm/s, 25 mm/s, 50 mm/s |
| ECG signal range: ±6 mV |
| Accuracy: ±1bpm/ ±1%, whichever is greater |
| Resolution: 1 bpm |
| Leakage Current < 10 μA |
| Input impedance: > 5.0Mohm |
CMRR: Diagnostic Mode >90 dB; Monitor Mode>100dB Surgery Mode>100dB |
| Baseline Recovery:≤ 5s after defibrillation (Monitor or Surgery mode) |
| Bandwidth: Surgery 1 ~ 20Hz Monitor 0.5 ~ 40 Hz Diagnostic 0.05 ~ 130 Hz |
| Against electrosurgical interference and defibrillation |
| Indication of Electrode Separation: Every electrode (exclusive of RL) |
![Veterinary Monitor Portable Patient Monitor for Animal]( "Veterinary Monitor Portable Patient Monitor for Animal")